Connecting The Camera To The Computer - Vivitar DVR 610 User Manual

5. If you have internet access, the "Choose your language" window opens, choose your
language and click "Next" to open the next window.
6. Select your camera model from the list and click "Next" to open the next window.
7. Click "Next" to confirm your camera model selection and to install the application.
8. Please wait while the application is being installed on your computer.
9. Please review the license terms.
On PC and Macintosh: Click the "I accept the terms of this license agreement" and then
click "Next" to continue.
10. On PC only: Let the "Vivitar Experience Image Manager" installer create the folder to
where the program will be installed, and then click "Install".
11. Please wait while the application continues the installation process on your computer.
12. On PC: Click the "Close" button when the installation is complete.
Click the "Launch Vivitar Experience Image Manager" to open the application.
13. On Macintosh: Click the "Quit" button when the installation is complete.
Click the "Launch Vivitar Experience Image Manager" to open the application.
14. If you close the application you can run the Vivitar Experience Image Manager from the
Programs (PC) or Applications (Mac) menu on your computer.

Connecting the Camera to the Computer

1. Make sure the SD Memory Card is inserted in the camera.
2. Slide the lever on the side of the camera to reveal the built-in USB connector.
Connect the camera‟s USB connector to the USB port of your computer.
3. The first time you connect the device to the computer you will have to wait a few seconds
until the computer recognizes the device.
4. As your camera is a mass storage device, "MSDC" appears on the LCD, indicating that
your camera is in Mass Storage Mode.
44