Navigating The Menus - Vivitar DVR 610 User Manual

To change the active camera mode, make sure the camera is powered ON and press the MODE
(M) button.
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display

Navigating the Menus

Each camera mode has a set of menus specific to that mode.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll between the various menus
for the current mode.
3. Press the UP or DOWN direction control buttons to highlight the desired menu option.
4. Press the SET button to select and save the highlighted menu option.
5. If the selection can be remembered by the camera, a selection icon
right of the selected menu option. Changes made to these options remain until you
change them again at a later time.
6. Some menu options are single-use functions that are not remembered by the camera and
do not display the selection icon
7. At any time you can press the MODE (M) button to exit the menus and return to the
previous screen.
when selected.
11
appears to the