Advertisement
Step 6.Ensure Infrastructure mode is Selected and NOT adhoc in section 7E below
Step 7.The required information fields are automatically filled in when you Enable a profile which you had already
selected in step 6, (with the exception of any password required if any security has been used on the wireless
network)
7a. Profile name ( the name you wish to give the profile to help so you remember the location E:G Starbucks Port of
Miami)
7b. SSID (the name of the network you want connect to and share)
7c. Authentication ( the type of security used on the network you are trying to connect to)..If it is a free open
network then it would show as disabled .(if the security is enabled then continue to in part 7d. below otherwise skip
this step and move on to 7.e
7d. Pass phrase (Here you enter the password if Authentication has been enabled
7e Network type (this should be set to Infrastructure mode and NOT ad-hoc)
7f. BSSID(optional)
7g.Encryption (the type of encryption used on the WiFi network if any)
Advertisement
