Hyundai Accent User Manual page 34

TROUBLESHOOTING
Problem
The power does not turn on
The system does not play
Sound does not work
The sound or image quality is low
The USB does not Work
The iPod is not recognized even though
it has been connected
Bluetooth does not work or its limited
functions are available
34
Possible Cause
Device is not properly connected
The vehicle battery is low
• The volume level is set to the lowest level
• The connection is not proper
• Vibration is occurring from where the conversion switch has
been installed
• Image color/tone quality is low
• USB memory has been contaminated
• A separately purchased USB HUB is being used
• A USB extension cable is being used
• A USB which is not a Metal Cover Type USB memory is
being used
• An HDD type, CF SD memory is being used
• There are no titles which can be played
• The iPod firmware version has not been properly updated
• The iPod device does not recognize downloads
• Bluetooth on your mobile phone is set to OFF
• The Bluetooth connection is not made
Countermeasure
• Check to see that the device has been properly connected.
• Charge the battery If the problem persists, contact your
point of purchase or service center.
• Adjust the volume level.
• Check to see that the device has been properly connected.
• The sound may be short circuited and the image distorted if
the device vibrates.
• The device will return to normal once vibrations stop.
• Remove any foreign substances on the contact surface of
the USB memory and multimedia terminal
• Directly connect the USB memory with the multimedia
terminal on the vehicle
• Directly connect the USB memory with the multimedia
terminal on the vehicle
• Use standard USB Memory
• Use standard USB Memory
• Use iTunes to download and save MP3 files into the iPod
• Use iTunes to update the firmware version and reconnect
the iPod with the device
• Reset the iPod and reconnect with the device
• Set it to ON
• Make the connection active