Controls And Connections - TrekStor SurfTab Xiron 7.0 HD Operating Instructions Manual

6) Controls and Connections

A) Camera front
B) Camera rear
C) Audio-Out connector
D) Micro-HDMI connector
E) Micro-USB connector
F) microSD-/microSDHC card slot
G) On/OFF switch
H) Volume control +
I) Volume control -
J) Microfone
K) Speaker
7) Charging SurfTab
Fully charge your SurfTab before you use it for the first time. Connect your
SurfTab with the micro USB cable to a computer or connect it using the mains
adaptor included. After about 3 hours the SurfTab is fully charged. Loading
time via a PC is considerably longer.
The maximum battery runtime is reached after about 10 battery charging cycles.
i
8) Switching on SurfTab
After charging your SurfTab you can switch it on. In order to start the device,
press the on/off switch for 3-5 seconds. As soon as the device is switched
on the lock screen appears. Tap on the lock symbol and drag it to the open
lock on the right. Your SurfTab will now show the home screen.
If you are using your new SurfTab for the first time, a configuration assistant
i
appears which helps you to adjust the first important settings on your
SurfTab. The settings you make here (for example language) can also
be altered again under "s " in the application menu.
Ettings
EN
23