Service Position; G Board Removal; D2 Board Removal; D Board Removal - Sony Trinitron KV-32FQ85B Service Manual

Ae-6bad/y chassis

Hide thumbs Also See for Trinitron KV-32FQ85B:

Table of Contents

Enlarged version

2-4. Service Position

To place the chassis in the service position, insert the main

bracket firmly into the T-slot located on the left corner of the

beznet as indicated (see inset). To gain access to the underside

of the boards follow the instructions on page 16. [Removal

and Replacement of the main bracket bottom plates].

Screws

To remove the D2 board remove the two screws circled,

release the clips circled and ease the board gently away from

the support bracket.

Clips

- 14 -

Clips

To remove the G Board remove the two screws from the

middle of the board, release the clips circled and ease the

board gently away from the support bracket.

Screws

Clips

To remove the D board first remove the D2 bracket by

removing the two screws circled and releasing the four

clips (two on each side of the bracket). The D board can

then be removed using the same method as the G board

but with the necessity to remove only one screw from the

middle of the D board.

Table of Contents

Trinitron kv-32fq85e