R-Series Technical Manual
6. ADJUSTMENTS
6.1 Media sensor position adjustment
The media sensor senses either the gap between labels or a hole or notch in the media to
determine the position and length of the label or ticked stock.
When using label with gap, user can position the sensor anywhere in side the gap. But when
using media with notch or hole, it may be necessary to reposition the media sensor.
1.
Open the print head module.
2.
Load the media properly.
3.
Adjust the sensor by moving the media sensor adjustment lever left or right.
4.
Close the print head module and top cover.
Argox Information Co., Ltd.
Rev. 1.02
Figure 6-1
November 24, 2008
20