Uninstalling Your Scanner; Step 1: Uninstalling The Visioneer Onetouch Software - Visioneer Strobe XP 200 Installation Manual

U Y
NINSTALLING
To uninstall the Visioneer Strobe XP 200 scanner, remove the scanner
software first, and then remove PaperPort, or other scanner software.
S 1: U
TEP NINSTALLING THE
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Double-click the Add/Remove Programs icon.
Windows 98, 98SE, or ME: The Add/Remove Programs
■
Properties window opens. Select the Install/Uninstall tab.
Windows 2000 or XP: The Add or Remove Programs window
■
opens. Make sure the Change or Remove option is selected.
3. From the list of programs, select Visioneer Strobe XP 200.
Windows 98, 98SE, and ME: Click the Add/Remove button.
■
Windows 2000 or XP: Click the Change/Remove button.
■
4. On the Select Uninstall Method window, make sure the Automatic
option is selected, and then click Next.
Important: The Automatic option is selected by default and is
recommended by Visioneer. The other options are for advanced users.
5. On the Perform Uninstall window, click Finish.
The Visioneer OneTouch software is uninstalled from your
computer.
6. If the Remove Shared Components window opens, Visioneer
recommends selecting No to All.
7. Unplug the USB cable from your computer and scanner.
8. Close all open windows and restart your computer.
U
NINSTALLING
S
OUR CANNER
V O
ISIONEER NE
Y S
OUR CANNER
T S
OUCH OFTWARE
39