Creating A New Autoscan Configuration - Visioneer Strobe XP 200 Installation Manual

C N A
REATING A EW UTO
You cannot change settings of the preset (default) configurations. To use
AutoScan with settings other than those offered by the preset
configurations, you must create a new configuration. You can do this
either by copying a preset configuration and making the desired changes
or by creating a new configuration from scratch.
To create a new configuration:
1. Scroll the applications in the Select Destination list and click the
application for which you want to create a new configuration.
2. Do one of the following:
Click the New button.
■
Select a preset configuration and click the Copy button.
■
3. On the New Scan Configuration dialog box, type a name.
If you are copying from a preset configuration, leave the name as
■
is or change it as required.
Note: If you select a printer or other device in the Select Destinations
list, the dialog box may have an additional tab for setting specific
options for the particular device.
C
ONFIGURING THE
S C
CAN ONFIGURATION
A S F 19
UTO CAN EATURE