Chapter 3: Maintenance; Recalibrating Your Scanner - Visioneer Strobe XP 200 Installation Manual

34 V S XP 200 S I G
ISIONEER TROBE CANNER NSTALLATION UIDE
Maintenance
This chapter contains information on recalibrating, troubleshooting,
cleaning, uninstalling, and scanner specifications.
R Y S
ECALIBRATING OUR CANNER
You calibrated your scanner during installation, but after many hours of
use you may find that scanned images may not be a sharp and clear as
when you began using the scanner. In that case, recalibration may solve
the problem.
The procedure to calibrate your scanner is slightly different for
Windows XP than for Windows 98, 2000, and Me. Make sure to use
the correct procedure below.
To recalibrate your scanner for Windows 98, 2000, or Me:
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Double-click Scanners and Cameras.