Setting The Time - Citizen 8651 Manual

Setting the Time

1. Pull the crown out to the time correction position (second position) when the
second hand reaches the 0 seconds position.
2. Turn the crown to the right (clockwise) and set the time.
• The day changes immediately after about 5:00 AM. Set the time while paying
attention to AM and PM by referring to the time when the day has changed.
3. Return the crown to the normal position in synchronization with a telephone or
other time service.
[Helpful Hint for Setting the Time Accurately]
After first stopping the second hand at the 0 seconds position, advance the hour
hand and minute hand 4-5 minutes past the correct time and then turn it back in the
counter-clockwise direction to the correct time to accurately set the time.
60
[Notes]
• If the date is corrected when the time on the watch is between 9:00 PM and
12:00 AM, the date may not change on the following day. Avoid correcting
the date during this time.
• The calendar operates based on a 31-day month. Correct the date by turning
the crown to the to the left to set to the first day of the following month in
months with less than 31 days (months with 30 days and February).
• Avoid correcting the month when the date hand indicates a date from the
31st to the 2nd. If you want to correct the month during this time, wait until
the date hand is outside the range of the 31st to the 2nd. Then reset the date
hand to the correct date.
• When turning the crown to the left (counter-clockwise) when correcting the time
or day, the changing of the date may change a day late during normal use.
61