12
L I Q U I D L E V E L I N D I C AT O R - INSTRUCTION MANUAL
—
4. Installation
4.1
4.1.1
Screw the arm (Fig 14/A) into the hole of the
backside shaft and block it with the M4 nut
(Fig.14/B).
A
B
Figure 14
4.1.2
Insert the arm into the slot (Fig.15/A) on the
backside shaft with and block it with the M5 nut
(Fig.15/B).
Figure 15
Float assembly
LA version (radial)
LB version (axial)
A
B
CAUTION
THE OPERATING AND THE INSTALLATION
REQUIREMENTS DESCRIBED IN THIS MANUAL
MUST BE STRICTLY FOLLOWING. IF NOT, THE
DEVICE CAN BE DAMAGED OR A MALFUNCTION
CAN OCCUR.