IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 3
section ”Care and Maintenance” of this manual for cleaning instructions. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Lightning and Power Surge Protection Unplug the unit from the wall outlet.
Page 5
MODE button -Press this button to select different play modes: RADIO/ AUX-IN /USB/CARD Button .In USB/CARD mode: to return to the beginning of current track or previous track .In radio memory selecting mode: to select the channel number downward Button. .In USB/CARD mode: to advance to the next track .In radio memory selecting mode: to select the channel number upward...
6. Vol- Button . To adjust volume level down 7. Vol+ Button . To adjust volume level up Button .In USB/CARD mode: to start of interrupt play 9. SD/MMC card slot 10. USB port 11. 3.5mm AUX-IN Jack 12. Power ON/OFF Switch 13.
- If the unit is not to be used for an extended period of time, remove the battery to prevent damage or injury from possible battery leakage. -Do not dispose of the battery in fire, the battery may explode or leak.
Page 8
Notes: -Manual tune to select weaker stations that might be by skipped during automatic tuning -If the automatic tuning does not stop on the exact frequency of the station, for example, it stops on 100.8MHz instead of 100.6MHz, use the manual tuning method to fine tune to the exact frequency of the desired station.
USB/SD OPERATION 1. Slide the Power ON/OFF switch to ON position to turn on the unit. 2. Connect your USB device or SD/MMC card to the unit to access “USB” or “CARD” mode, the relevant “USB” or “CARD” icon appears on the display. The USB or SD/MMC card will start playing automatically once the contents scanning is finished.
Page 10
2. Turn on the external audio source and play your device. 3. Slide the Power ON/OFF switch to ON position to turn on the unit. 4. Press MODE button until “AUX” icon appears on the display. 5. The volume level can now be controlled through the main unit.
CARE AND MAINTENANCE -Do not subject the unit to excessive force, shock, dust or extreme temperature. -Do not tamper the internal components of the unit. -Clean the unit with a damp (never wet) cloth except metal contact or speaker grille, Solvent or detergent should never be used.
Need help?
Do you have a question about the High Line TR100 and is the answer not in the manual?
Questions and answers