Thermo Scientific Smart-Vue Pro Duo User Manual page 44

To acknowledge alarms:
1. Tap the Acknowledge button (1).
Figure 56. Tap Acknowledge button to clear alarm
2. Enter your PIN code and tap OK.
3. Tap the up/down arrows (
the acknowledgment.
Figure 57. Choose a reason for acknowledging the
alarm
4. Once the alarm is acknowledged, the alarm icon is no
longer shown (alarm icon is displayed as crossed bell) on
the Smart-Vue Pro Duo/Quatro data logger screen. The
alarm status is also updated in the Smart-Vue Pro web
application.
Alarm Delay Indicator
You may program a delay before the alarm is triggered while
setting up data logging. For example, you could set a
5 minutes delay for the data logger, where its value is the
multiple of read interval. As per the delay set data logger to
40 | Alarm Management
1
or ) to select a reason for
wait before triggering an alarm in case the temp rises above
the programmed limit
In that case, if a reading on your Smart-Vue Pro Duo/Quatro
data logger goes over a programmed limit value, a stopwatch
(1) is displayed in the upper left-hand corner to indicate that
the data logger is in a "pre-alarm" state.
1
Figure 58. Pre-alarm indicator on data logger
display
CAUTION: The presence of the stopwatch icon
indicates that the data logger has encountered
an alarm condition but that the end of time delay
has not yet reached.
Smart-Vue Pro Duo / Quatro User Guide