Thermo Scientific Smart-Vue Pro Duo User Manual page 12

Table 1. Smart-Vue Pro LoRaWAN Operation
Step Process
Plug in wired sensors (which are recognized
automatically) and/or pair Bluetooth® sensors (for
future).
2
Use the data logger's touch screen to connect
wirelessly to your on-premises LoRaWAN™
receiver or a public network.
Login to the Smart-Vue Pro Duo/Quatro web
application.
Set up the data logger and configure data logging
3
settings such as upper and lower limit values. Push
the configuration to your Smart-Vue Pro Duo/Quatro
data logger. The data logger is updated and data
logging begins.
The data logger collects data from its sensors and
4 transfers the information wirelessly to the
Smart-Vue Pro LoRaWAN network.
Uploaded data logging details are visible on
5
smart-vuepro.thermoscientific.com
Table 2. Bluetooth-only Operation
Step Process
Place the Smart-Vue Pro Duo/Quatro data logger
1
appropriately to monitor your equipment.
Plug in wired sensor (which are recognized
automatically).
Note: You may plug only one sensor into a Smart-
Vue Pro Duo/Quatro data logger in bluetooth mode.
2
Use the data loggers touch screen to deactivate
Smart-Vue Pro LoRaWAN connectivity

(Menu Advanced

LoRaWAN
Login to Smart-Vue Pro Duo/Quatro web
application.
3 Create the Smart-Vue Pro Duo/Quatro data logger.
Use the Smart Connect to configure data logging
settings such as upper and lower limit values.
The data logger collects data from its sensors.
Data is stored until you access it with either your
4
smart-phone or tablet (which can push it to the web
platform).
Uploaded data logging details are visible on
5
smart-vuepro.thermoscientific.com.
8 | Introduction
 
[PIN code] OK
  
On/Off Off Save).
Comments
The Smart-Vue Pro web application authenticates users,
configures alarm settings, programs data logging,
analyses data, generates reports.
Installed at your site, LoRaWAN receiver transmits
locally collected sensor data via the internet to the web
platform or your server as programmed.
You may use computers with web browser to access
readings and alarms.
Comments
Note: Bluetooth connectivity is limited to about 30 meters
indoors. Keep the data logger in an area that is as
unobstructed as possible.
Bluetooth remains active when you deactivate
LoRaWAN functionality.
All data logger configuration is handled using the Thermo
Scientific Smart Connect mobile application.
Your smart-phone or tablet will transmit locally collected
sensor data via the internet to the web platform.
Smart-Vue Pro Duo / Quatro User Guide