Table of Contents
Advertisement
Battery
The battery in the Smart Siren is used to send an "AC
unplugged" event to the Smart-Vue Pro Web Application.
Once the device sends the unplug event to the Smart-Vue
Pro Web application, the device will go into sleep mode until it
is connected to AC power.
A communication failure alarm will be triggered if data from
the Smart Siren is not received by the Smart-Vue Pro Cloud
server after a defined time interval as configured in the Smart-
Vue Pro Application, with or without the AC adapter
connected to the Smart Siren.
In case of a low battery, the "low battery" event is generated
by the Smart Siren and is sent to the Smart-Vue Pro Web
application. In normal use, when the device is plugged into
AC power, the battery will not discharge. Battery life is
extended as long as the device is plugged into AC power.
Adjusting Siren Volume
The siren volume is adjustable from 60 dBA to 100 dBA
(± 10%). Adjust the volume to meet your needs by turning the
screw-knob inside the cavity on the bottom of the unit as
shown here:
Volume: Clockwise tuning shall increase the volume and anti
clock wise tuning shall decrease the volume.
Note: Use a appropriate star screw driver for adjusting the
volume.
Snooze: A short press on the push button snoozes the buzzer
locally i.e. the sound is muted and LED is turned OFF until
Smart-Vue Pro webapp sends a new alarm or rings for an on
going alarm after 12 hours.
Buzzer shall be muted for 12 hours or till a new alarm is
detected on the datalogger or Webapp.
Smart Siren User Guide
Cleaning Instructions
You may occasionally need to clean your siren modules,
depending on conditions at your site. Here are some
recommendations and guidelines for cleaning your siren:
1. Always unplug the device from its AC power source
when cleaning with any type of liquid.
2. Clean the module using a soft cloth lightly moistened with
water, a detergent or isopropanol alcohol.
3. Do not use any aggressive cleaning agents or scratching
cleansers that might damage your Smart Siren.
4. Do not submerse the siren in any liquid, as the casing is
not waterproof.
Using the Smart Siren |
9
Advertisement
Table of Contents
