Where To Find More Information - Thermo Scientific Smart Siren User Manual

Architecture Overview
Thermo Fisher Scientific sirens connect wirelessly to your LoRaWAN receiver, just as the other wireless modules in your
network:
Smart-Vue Pro
LoRaWAN
enabled
dataloggers
Smart
Siren
Figure 2. Smart Siren as part of your Smart-Vue Pro monitoring solution
The Smart-Vue Pro web monitoring platform triggers the siren wirelessly when it detects an alarm condition on an end-module
or repeater.
General Requirements and
Recommendations
• For safety reasons, the siren should be mounted less
than 2 meters (about 6.5 feet) from the floor.
• The AC adapter used for your Smart Siren should be
plugged into an uninterruptible power supply (UPS).
• Weekly manual system testing should be performed as
defined in your Standard Operating Procedure (SOP).
• Thermo Fisher Scientific recommends Installation and
Operational Qualifications (IQ/OQ) be performed before
initial use.
Smart Siren User Guide
Smart-Vue Pro
LoRaWAN
gateway
Where to Find More
Information
The use and operation of your Smart Siren is described in the
Smart-Vue Pro web application user guide. You may click on
Help
from the web application interface.
Smart-Vue
Pro Cloud
Customer
Service
Online Help
Smart-Vue Pro
web application
User guides to open directly
Introduction | 7