VIPowER VPM-6248T User Manual page 15

USB 2.0 Port
Connector
VPM-6248T External Connector Locations
Power Adapter
Power Cord
Plug into AC
Power Outlet
Step 6:
Power ON your VPM-6248T External Enclosure. The LED
indicators on the MobileRACK and external enclosure should light
after a slight delay.
Step 7:
Plug the second USB connector end of the USB cable into a USB
port on our computer. The VPM-6248T is ready to use.
This device will auto-detect the speed of your
USB port and adjust between USB 1.0 and USB
2.0 speed once the driver is installed.
VPM-6248T USER MANUAL
+5V/+12V
Power Adapter
Plug into USB Port
on Computer
VPM-6248T Connections
Note:
+5V/+12V
Power Inlet
Power
OFF ON
ON/OFF
Switch
USB 2.0
Cable
15