Led Indicators; Mounting A 3.5-Inch Drive In The Mobilerack - VIPowER VPM-6248T User Manual

2-3 LED Indicators

Red and green indicators are located on the front panel of the
VPM-6248T External Enclosure. The green LED is lit when the
power is ON. The red activity LED will flash when a HDD
installed in the MobileRACK is being accessed.
VPM-6248T Front Panel with the MobileRACK

2-4 Mounting a 3.5-inch Drive in the MobileRACK

The VPM-6248T External Enclosure is factory configured with
the MobileRACK already installed.
Although these instructions specify a hard disk installation, the
steps are typical for mounting any device in the MobileRACK
drive case.
Step 1.
Separate the MobileRACK drive tray from the drive case installed
in the VPM-6248T External Enclosure by lifting the handle and
pulling the drive tray out.
Remove the
MobileRACK
Drive Tray
Remove the MobileRACK Drive Tray
10
MobileRACK
LED Indicators
MobileRACK
Latch-Lock
VPM-6248T
LED Indicators
Green LED Red LED
(Power) (HDD Access)
VPM-6248T USER MANUAL