2-1.2 Assemble Cd-Rom Box With Cd-Rom Drive - VIPowER CD-ROM Box Enclosure VP-6020 Installation Manual

Top Cover
(Note alignment
flanges)
Connectors/Fan
End-Panel
Bottom Cover
(Note cut-out
for flange)
Retaining
Screws
(x4)

2-1.2 Assemble CD-ROM Box with CD-ROM Drive

1. Attach the two connectors from the end-panel assembly to the appropriate
connectors on the CD-ROM drive.
End-Panel
Assembly
Pin-1 Colored
Stripe
4-pin Power
Connector
Power and Data Connector Drive Connections
CD-ROM Box Enclosure Installation Guide
CD-ROM Box Enclosure Components
Retaining
Screws
(x4)
Drive Rails
40-pin IDE
Data Connector
CD-ROM
Drive
Vertical-Holder
Stand (Optional)
Rubber
Stands
(x4)
3