3-1.1 Disconnecting The Cd-Rom Box - VIPowER CD-ROM Box Enclosure VP-6020 Installation Manual

b. When using the Docking Kit's interface for power, set switch to the RIGHT
position. Note: it is recommended that you use the +5V /+12V power adapter
whenever possible.
6. Connect the Docking Kit's interface cable into the appropriate interface port on
your computer; plug the other end into the connector port on the Docking Unit.
7. Viewing the screen, note that the plug-and-play feature will recognize the new
device and assign it as a new drive.
The device is now ready to use.
External
Power Adapter
Connections with Docking Unit for Operation
3-1 Disconnecting the CD-ROM Box
1. Unplug the interface cable from the Docking Unit. (Note that the drive icon will
disappear from the computer screen.)
2. Turn power on Docking Unit OFF.
3. You can now switch to another device. When connecting a new device, be sure to
follow the same sequence for setup as previously outlined in section 3.0.
Printed on recycled paper.
Interface
Cable
Power Adapter
Power Cord
Connector
to Computer
Docking Unit
CD-ROM Box