Hardware Installation; Analog Audio Connector(Jp1); Jumper Settings; 2-2.1 Jumper Settings For Assembling With Mobilerack - VIPowER USB 2.0, 5.25-inch External Enclosure VP-6228T User Manual

2. Hardware Installation

2-1 Analog Audio Connector(JP1)

Bulid-in connector (JP1) has two channels,right("R") and left ("L")
audio outputs, and allows you to direct audio output from your CD/
DVD-ROM Drive to your sound device.

2-2 Jumper Settings

2-2.1 Jumper Settings for assembling with MobileRack

Jumper JP6, located on the rear PCB panel of the VP-6228(T), is
used to set running the VP-6228(T) external enclosure. The
producer setting is JP6 pins 1-2 ON.
3
JP6 1-2 :ON -->VP-6228(T) RUN
2
(Producer setting)
1
6
JP1
L GND GND R
VP-6228(T) USER MANUAL