(Place one 5.25" IDE Device in the bottom enclosure cover)
b) Attach the IDE 40-pin data cable from the rear panel of the
bottom cover to the 40-pin connector on the back of the 5.25 "
device or Mobile Rack. To ensure pin-1 to pin-1 connection, orient
the cable so the colored stripe edge is closest to the power
connector.
c) Attach the 4-pin power cable from the rear panel of the bottom
cover to the 4-pin connector on the back of the 5.25" device or
Mobile Rack. The connector is "D" shaped to ensure proper
connection.
40-pin IDE Data
Connectors
IDE 40-pin Data Cable
on the rear panel
of the bottom cover
10
One 5.25" Device or
one MobileRACK
4-pin Power
Connectors
4-pin Power Cable
on the rear panel
of the bottom cover
VP-6228(T) USER MANUAL