VIPowER USB 2.0, 5.25-inch External Enclosure VP-6228T User Manual page 26

Step4:
For the first screen of FDISK, answer the question:
Do you want to enable large disk support?
[Y] if you want to build a partition larger than 2GB.
[N] if you want to build a partition small than 2GB.
Step5:
The next screen is [FDISK OPTIONS]. Type [5] to select the disk.
Important:
You must type [5] in this screen to change the current fixed
disk drive to build a partition. The default fixed drive set by
FDISK is your internal hard disk drive.
If you don't change the fixed disk drive to the
USB 2.0 Hard Disk, the data of your internal
hard disk will be destroyed!
Step6:
In the [Change Current Fixed Disk Drive], type the disk drive num-
ber that is assigned to the USB 2.0 Hard Disk.
Step7:
Go back to [FDISK OPTIONS] screen, Now you can create or
delete a partition of the USB 2.0 Hard Disk.
Step8:
After you finish FDISK, go back to the Windows screen, discon-
nect and then reconnect the USB 2.0 Hard Disk again to activate
these changes. Double click on [My Computer]. The USB 2.0 Hard
Disk Drive icon that you have now partitioned should be seen.
26
WARNING!!
VP-6228(T) USER MANUAL