Download Print this page

EchoStar HUGHES HT2000W Manual

Wi-fi booster

Hide thumbs Also See for HUGHES HT2000W:

HUGHES WI-FI Booster

Specifically engineered to extend your HughesNet Wi-Fi

signal for seamless browsing and streaming in every room

Table of Contents

Need help?

Do you have a question about the HUGHES HT2000W and is the answer not in the manual?

Page 1 HUGHES WI-FI Booster Specifically engineered to extend your HughesNet Wi-Fi signal for seamless browsing and streaming in every room...
Page 2 STEP 1: Connect and Configure For the initial setup, you must be near your Hughes HT2000W Wi-Fi Modem. 1. To configure the Hughes Wi-Fi Booster: A. Plug the AC adapter into the Booster and the other end into a power outlet.
Page 3 STEP 2: Synchronize 2. Watch the LED on the Booster as the device automatically syncs with your Hughes modem. The LED will flash purple for a few minutes while this happens. See Figure 4. A. When the LED is solid blue, the sync is complete.
Page 4 STEP 3: Place 3. Relocate the Booster to an area of the house halfway between where you have an excellent Wi-Fi signal and where you have no signal. You can use the Wi-Fi signal strength gauge in the HughesNet Mobile App to help find this area.
Page 5 No connection to your modem or the Wi-Fi Booster is not properly configured. Try moving the Booster closer to your Hughes HT2000W modem or reconfigure the Booster starting at Step 1. The device is booting. It can take a few minutes to Light purple fully boot.
Page 6 (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright © 2020 Hughes Network Systems, LLC, an Echostar company. All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, LLC.