Battery & Charging - urban drivestyle UDX 204 User Manual

14
Charging the Battery
First plug the power cable into the socket and then the cable into the
socket of the UDX Bike.
When the input and output of the charger is connected to the UDX Bike,
the red indicator lights up. The battery is full when the indicator light
changes from red to green. At this point you can remove the charger and
Charging Socket
close the protective cover again.
Standard Charging Time:
With the appropriate charger and at an ambient temperature between 10°
C and 30°C,, the UDX Bike will fully charge within 4-6 hours.
The supplied charger has an overcharge protection which is damaged by a
high current input. The charging current must be less than 2A. Long-term
charging with a high current can damage the battery and reduce its
overall battery capacity and life.
Note:
The battery can be charged both inside and outside the bike.
Make sure to maintain the battery in an ambient temperature condition as
extreme cold or hot temperatures can affect the battery capacity and life.
7. Battery & Charging