Display Guide - urban drivestyle UDX 204 User Manual

LCD Display Guide
Switching On/Off
Power Button
Your UDX Bike is switched on and
off by pressing & holding the
Power Button, located on the
display unit.
Turn it on: Keep the power button
pressed until the display lights up
and digits appear.
Turn it off: Press and hold the
power button until the display
goes off.

6. Display Guide

Light Control
Lamp Icon
Arrow-Up Button
Arrow-Down Button
In order to turn on the front and
rear lights of your UDX Bike, press
and hold the "arrow-up" button on
the display unit, until the display
light turns on and a lamp icon
appears.
To turn off the lights, press and
hold the "arrow-up" button again,
until the display light goes out and
the lamp icon disappears.
Support Levels
The "arrow-up" and "arrow-down"
buttons on the display unit are
used to adjust the motor support
level of the bike.
At the highest level "five" (5) the
speed is max. 25km/h according to
European e-bike regulations.
Pressing the "arrow-up"
increases the speed level by one.
Pressing the "arrow-down" key
reduces the speed of the
level at one.
12
key