Disarming The Vrs - Viper Model 480XV Owner's Manual

➜

disarming the vrs

Take the time to familiarise yourself with the VRS
quence and the disarm procedure. It is important to recognise
and identify the VRS
it in case of accidental activation.
Once the VRS
must disarm it the next time you operate the vehicle. You must
disarm it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
If the system has entered the triggered sequence (siren has begun
chirping), pressing the
VRS . To disarm the VRS
®
42
®
trigger sequence and know how to disarm
®
is armed, it does not disarm automatically. You
®
1. Turn the ignition on.
2. Press the
second. The lights will flash and the siren will
chirp twice.
button of the remote will not disarm
during a VRS
®
1. Turn the ignition on.
2. Begin entering your 4-digit PIN
code as noted in the Entering
Your PIN section of this guide.
button on the remote for one
trigger sequence:
®
© 2005 directed electronics, inc.
triggering se-
®
DRW-35