Table of Contents
Advertisement
Installation procedure
Installation of indoor unit
Selection of installation place
Place where it is easy to route drainage pipe and outdoor piping.
Place away from heat source and with less direct sunlight.
Place where cool and warm air could be delivered evenly to every corner of the room.
Place near power supply socket. Leave enough space around the unit (refer to installation
drawings).
Fixing of the unit
1.
Position of the wall hole
Wall hole should be decided according to installtion place and piping direction. (refer
to installation drawings)
2.
Making a wall hole
Drill a hole of 70mm dia. with a little slope towards outside.
Install piping hole cover and seal it with putty after installation.
Fixing of indoor unit
To prevent it from fall off, please fix the unit with fall-prevention fitting at wall and
L-shaped metal at floor.
Self-tapping
screw
All manuals and user guides at all-guides.com
all-prevention fitting metal (accessory)
Wood screw
L-shaped metal
(accessory)
INDOOR
OUTDOOR UNIT
wall hole
70mm
( Cross section of wall hole )
Please install the whole
unit horizontally,with a slop
of 1 degree at front and
rear,left and right.
16
indoor unit
wall thinkness
Advertisement
Table of Contents
