Viper Model 3002 Owner's Manual page 40

note: This feature will only function if the Failsafe®
Starter Kill relay has been installed.
➤ Full trigger response 3 3 0 0 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Directed Bitwriter, the full triggered
response can be programmed for any duration ranging from
1 to 180 seconds.
➤
Nuisance Prevention
NPC section of this manual for a complete explanation of
®
how NPC
ty system will respond to inputs from any sensor indefinitely.
note: Because many states have laws regulating security
systems, programming NPC
to violate state laws.
➤ Progressive door trigger o o n n or off: When the system is armed
and a door is opened, the system responds with ten chirps
prior to beginning the full triggered sequence. If an instant
trigger is desired, the progressive door trigger can be pro-
grammed off.
➤ Valet
®
button required to disarm the security system, AED, or the
VRS system can be programmed from one to five presses. The
®
default setting is o o n n e e press.
➤ Siren tones and chirp volume: The output of the Revenger
© 2006 directed electronics
Circuitry o o n n or off: Please refer to the
®
operates. If NPC
®
pulse count: The number of presses of the Valet
is programmed off, the securi-
®
off may cause your system
®
®
®
41