GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit, use a
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries following the diagram
5. Replace the battery cover and tighten the screw to secure.
610600 manual.indd 4
screwdriver to loosen the screw and open the battery box.
inside the battery box. (The use of new alkaline batteries is
recommended for maximum performance.)
4
03/02/2020 11:43:49