Extracting The Antenna Connected To The Internal Wi-Fi Card - ZCS Azzurro ZSM-WIFI-KIT Complete Manual

Technical Note "Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi" - Rev. 1.2 of 20/05/2019
Figure 35 – Procedure for extracting the antenna connected to the internal Wi-Fi card
Estrarre
Allentare
Serrare
4) Check the RS485 address of the inverter. Enter the main menu with the ESC key (first key on the left),
go to the SYSTEM INFO and press ENTER to enter the submenu. Scroll down, making sure that the
number 01 appears next to the RS485 address.
5) N.B.: the following process can be performed either via smartphone or PC.
1) Search for any wireless networks so as to display and connect to the network of the inverter's
Wi-Fi card, which is: AP_0805739627.
The number indicates the serial number of the Wi-Fi card, which can be checked by referring
to the smaller label located on the bottom left of the inverter.
2) Open the browser and enter the following IP address in the search bar to access the web
server inside the Wi-Fi card: 10.10.100.254
3) For both the username and the password, enter: admin
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Extract
Loosen
Fasten
Page 24 of 38