Paragraphs Of The Document; Preliminary Notes On The Configuration Of The Wi-Fi Card - ZCS Azzurro ZSM-WIFI-KIT Complete Manual

Technical Note "Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi" - Rev. 1.2 of 20/05/2019
PURPOSE OF THE DOCUMENT
The purpose of this document is to guide the user on how to configure the Wi-Fi card installed on Azzurro
ZCS inverters in order to be able to monitor the system on one of the AzzurroZCS platforms.
The document also contains a series of checks and inspections to be carried out in case of incorrect
configuration of the Wi-Fi card.
Finally, the document outlines the procedure for registering and configuring the system on two of the
available monitoring platforms: AzzurroZCS APP and AzzurroZCS web portal.

PARAGRAPHS OF THE DOCUMENT

1

Preliminary notes on the configuration of the Wi-Fi card

2.1 Procedure for installing an internal Wi-Fi card
2.2 Procedure for configuring an internal Wi-Fi card
3.1 Procedure for installing an external Wi-Fi adapter
3.2 Procedure for configuring an external Wi-Fi adapter
4 Procedure for checking the correct configuration of the Wi-Fi card
5 Procedure for registering on the AzzurroZCS application
6 Procedure for registering on the AzzurroZCS portal
1 PRELIMINARY NOTES ON THE CONFIGURATION OF THE WI-FI CARD
The AzzurroZCS inverters can be monitored by means of a Wi-Fi card connected to a Wi-Fi network present at
the place of installation. Depending on the model purchased, this card may already be present on board the
inverter or it can be installed at a later date, since all AzzurroZCS inverters are set up for monitoring. In the
first case, it will only be necessary to configure the Wi-Fi card, connecting it to a suitable wireless network, as
shown below. If the Wi-Fi needs to be installed, you will need a qualified installer or technician to correctly
assemble the card.
The following two types of Wi-Fi adapters are available on the market:
 Internal Wi-Fi card (code ZSM-WIFI-KIT)
 External Wi-Fi adapter (code ZSM-WIFI-EXT)
The two devices, although different in appearance and method of installation and configuration, have the
same function, i.e. to transmit data from the inverter to a web server to allow remote monitoring of the
system.
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page 2 of 38