Advertisement
Pairing the telephone module with the
mobile phone
Valid for vehicle model series starting from
date of manufacture 06/2008:
•
A-Class, model series 169,
•
B-Class, model series 245,
•
E-Class, model series 211,
from date of manufacture 07/2008:
•
M-Class, model series 164,
•
GL-Class, model series 164, and
•
R-Class, model series 251,
when equipped with Audio 20 operating sys-
tem.
Note
The operation of the audio system is descri-
bed in the separate owner's manual.
1.
Switch on the audio system. (Please re-
fer to the vehicle Owner's Manual.)
2.
Select telephone mode:
Press the h button on the audio system.
NO PHONE
appears in the multi-function dis-
play.
9
8
6
M+P-03F-6901
3.
Press and hold the thumbwheel (8) on
the receiver (6) for approx. 3 seconds wit-
hout turning it. The LED (9) flashes rapidly.
WAIT...
appears in the multi-function dis-
play.
Pairing the telephone module with the
mobile phone
Valid for all other vehicle model series with
Audio 20.
Note
The operation of the audio system is descri-
bed in the separate owner's manual.
1.
Switch on the audio system. (Please re-
fer to the vehicle Owner's Manual.)
2.
Select the telephone menu:
Press the è or ÿ button on the multi-
function steering wheel. A message appears
in the multi-function display that no mobile
phone is connected.
9
8
6
M+P-03F-6901
3.
Press and hold the thumbwheel (8) on
the receiver (6) for approx. 3 seconds wit-
hout turning it. The LED (9) flashes rapidly.
WAIT...
appears in the audio system dis-
play.
4.
Select the call list:
Press the s button on the multi-function
®
steering wheel. The Bluetooth
names of
the mobile phones within the reception ran-
ge appear in the multi-function display.
11
4.
Select the call list:
Press the s button on the multi-function
steering wheel. The Bluetooth
mobile phones within the reception range ap-
pear in the multi-function display.
Note
If the desired Bluetooth
played, the Bluetooth
phone must be checked, and corrected if ne-
cessary. (Please refer to the mobile phone
operating instructions.) If the settings are
correct, the mobile phone can be searched
for in the call list using "
audio system.
5.
Once the Bluetooth
press the NUM function key on the audio sys-
tem. A 16-digit PIN number appears in the
multi-function display.
6.
Please write down the 16-digit PIN num-
ber displayed.
Note
Only 12 digits can be displayed in the multi-
function display. The last digits must there-
fore be cleared using the
on the audio system in order to display the
first digits.
7.
Press the t button on the multi-func-
tion steering wheel. The Bluetooth
the mobile phone appears again on the multi-
function display.
8.
Press the s button on the multi-func-
tion steering wheel.
9.
When requested to do so, enter the PIN
number you have written down on the mobile
phone within 20 seconds and confirm. After
pairing has been successfully completed (in-
dicated by an ascending melody),
appears in the multi-function display.
14
Note
If the desired Bluetooth
displayed, the Bluetooth
mobile phone must be checked, and correc-
ted if necessary. (Please refer to the mobile
phone operating instructions.) If the settings
are correct, the mobile phone can be sear-
ched for in the call list using "
on the audio system.
Select the mobile phone using the j
5.
or k button on the multi-function stee-
ring wheel and confirm. A 16-digit PIN num-
ber appears in the multi-function display.
6.
When requested to do so, enter the dis-
played PIN number on the mobile phone
within 20 seconds. After pairing has been
successfully completed (indicated by an as-
cending melody),
WAIT...
multi-function display.
Notes
A descending melody indicates that pairing
was unsuccessful. If this happens, please re-
peat steps 3 through 6.
7.
Depending on the type of mobile phone
you are using, the connection query of the
telephone module must be confirmed on the
mobile phone. For a connection query of the
telephone module, the mobile phone must
be set to "Automatic" or "Authorised yes".
(Please refer to the mobile phone operating
instructions.)
8.
Enter the PIN number of the SIM card on
the audio system and confirm.
12
®
names of the
®
telephone is not dis-
®
settings on the mobile
" on the
SEARCH...
®
name appears,
function button
CLR
®
name of
WAIT...
15
®
telephone is not
®
settings on the
SEARCH...
"
appears in the
Note
A descending melody indicates that pairing
was unsuccessful. If this happens, please re-
peat steps 3 through 9.
10.
Depending on the type of mobile pho-
ne you are using, the connection query of the
telephone module must be confirmed on the
mobile phone. For a connection query of the
telephone module, the mobile phone must
be set to "Automatic" or "Authorised yes".
(Please refer to the mobile phone operating
instructions.)
11.
Enter the PIN number of the SIM card
on the audio system and confirm.
Connecting the telephone module with
the mobile phone
Notes
Before being connected, the mobile phone
must be paired with the telephone module
(see
6
to
14).
The telephone module always searches for
and connects with only the most recently
connected mobile phone. For information on
searching for and connecting other paired
mobile phones, see
18.
Automatic connection
When a paired mobile phone is within the te-
lephone module's range, and COMAND or
the audio system is switched on,
Please
enter PIN
appears in the COMAND or mul-
ti-function display.
1.
Enter the PIN number of the SIM card on
COMAND or the audio system. Telephoning
via the hands-free unit is then possible.
Note
The PIN number is saved by the telephone
module. Entering the PIN number again is
only necessary if the SIM PIN number has
changed.
Manual connection
For S-Class vehicles, model series 221, and
CL-Class vehicles, model series 216:
1.
Using the COMAND controller, select
"Telephone"
"Telephone on" and confirm.
For all other vehicle model series:
1.
Press the
button on COMAND or
the audio system.
13
16
Advertisement
