Panasonic PT-AE700U Service Manual page 6

PT-AE700U / PT-AE700E
2 Ext Option
This projector has EXT OPTION in addition to standard on-screen menus.
· There are SELF CHECK, SERVICE MODE and FLICKER ADJ for service, etc.
2.1. Procedure to enter EXT OPTION
1. Press "MENU" button on the main unit or remote control unit to display "MENU" screen, then select "OPTION" and press
"ENTER" button.
2. Select "OSD" on "OPTION" menu and press "ENTER" button 3 seconds or longer.
MENU → OPTION → OSD
2.2. EXT OPTION Menu and Functions
· FREEZE MSG
Switching ON/OFF "FREEZE" on-screen display
· PIC.SHIFT
Switching ON/OFF the antipersistence function
− − − − Shifts the picture slightly (by one dot) when every 60 minutes. (one dot shifting three times, one dot shifting three times in
reverse direction, and repeats them alternately.)
· RUNTIME PRT
Switching ON/OFF the shutdown when the operation time for the lamp unit is 2 000 hours or longer
· FAN CONTROL
Setting the cooling fan motor rotation speed
− − − − Switching ON "FAN FULLMODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULLMODE" is ON, changing "FAN CONTROL" in OPTION becomes impossible (setting FAN FULLMODE is given priority
more than FAN CONTROL).
· AUTOSETUP
Setting AUTO SETUP mode
− − − − NORMAL: To set the normal mode (the dot clock is adjusted strictly)
− − − − SPECIAL: To set the special mode (the dot clock is adjusted roughly)
* Do not change the initial setting (NORMAL).
· SELF CHECK
To enter the self-check mode
· SERVICE MODE
To enter the service mode
· FLICKER ADJ
To enter the flicker adjustment mode
2.3. Canceling EXT OPTION
Press "MENU" button on the main unit or remote control unit.
6