Panasonic SC-HTR310P Service Manual page 87

Step 18 : Remove 2 screws.
Step 19 : Release the catches and remove the fan unit.
Step 20 : Connect 3P cable at the connector (CN5501) on D-
Amp P.C.B..
Step 21 : Connect 8P cable at the connector (CN601) on Panel
P.C.B..
Step 22 : Connect 9P cable at the connector (CN602) on Panel
P.C.B..
Step 23 : Connect 15P FFC cable at the connector (CN222) on
Main P.C.B..
Step 24 : Connect 10P FFC cable at the connector (CN200) on
Main P.C.B..
Step 25 : Connect 8P cable at the connector (CN5500) on D-
Amp P.C.B..
Caution : Ensure the cable is attached properly.
Step 26 : Position Fan unit and D-Amp P.C.B. with the object
support according to the diagram shown.
Step 27 : Check & repair D-Amp P.C.B. according to the
diagram shown.
87
SC-HTR310P