Pioneer ELITE VSX-LX104 Instruction Manual page 75

ZONE B Playback
While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier, etc. (ZONE B)
( p41) connected to the ZONE B LINE OUT jack at the same time.
Playing Back
Contents Connections
≫
1. Press the button on the remote controller to select "Other" - "Zone B".
• When ZONE 2 is On, "Zone B" cannot be selected.
2. Select an audio output destination.
Off: Outputs audio only to ZONE A. "A" on the display of the main unit lights
up.
On(A+B): Outputs audio to both ZONE A and ZONE B. "A" and "B" on the
display of the main unit light up.
On(B): Outputs audio only to ZONE B. "B" on the display of the main unit
lights up.
3. Start play on the AV component.
4. Adjust the sound volume on the pre-main amplifier, etc. of ZONE B.
If "On (A+B)" is selected as an audio output destination, you can select only the
"Stereo" listening mode for ZONE A when using the 2.1ch speaker layout. When
using a speaker layout of 3.1ch or more, you can select only the "Ext.Stereo"
listening mode.
75
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫