Pioneer ELITE VSX-LX104 Instruction Manual page 118

„ Firmware Update
Change the settings for Firmware Update.
Setting Item Default Value
Update Notice Enable
Version -
Update via -
NET
Update via -
USB
• Wait for a while if "Firmware Update" cannot be selected. It can be selected when the
network function is activated.
„ Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It can be selected when
the network function is activated.
Setting Details
Availability of a firmware update is notified via
network.
"Enable": Notify updates
"Disable": Do not notify updates
The current firmware version is displayed.
Press ENTER to select when updating the firmware
via network.
• This setting cannot be selected if you do not
have Internet access or there is no updatable
firmware.
Press ENTER to select when updating the firmware
via USB.
• This setting cannot be selected if a USB storage
device is not connected or there is no updatable
firmware in the USB storage device.
Contents Connections
≫
„ Lock
Lock the Setup menu so that the settings cannot be changed.
Setting Item Default Value
Setup Parameter Unlocked
„ Factory Reset
All the settings are restored to factory defaults.
Setting Item Default Value
Factory Reset -
118
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
Setting Details
All the settings are restored to factory defaults.
Select "Start", and press the ENTER button.
• If "Factory Reset" is performed, your settings are
restored to the default values. Be sure to note
down your setting contents beforehand.
≫