Connect The Cable; Adjust The Angle - Epson BrightLink Pro 1430Wi Installation Manual

F

Connect the cable

Connect the Touch Unit connection cable that is connected to the projector to the port on the Touch
Unit.
G

Adjust the angle

Adjust the angle of the laser light coming from the Touch Unit so that the Touch Unit can detect the
position of your fingers.
Make sure to calibrate the interactive pen(s) before adjusting the angle. Press the User
button on the remote control and select Yes to perform an auto-calibration. Refer to
the projector's online User's Guide for detailed instructions on calibrating the pen(s).
1. Select Easy Interactive Function from the Extended menu.