Coopers of Stortford Light-Up Plinth w/Planter Instructions For Use

Light Up Plinth w/Planter
Please read and retain these instructions for future reference

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed from the packaging.

METHOD OF OPERATION:

The solar panel absorbs solar power during the day and transforms it into electricity, which is then stored in
the rechargeable battery. When darkness falls, the lamp lights automatically using the energy stored during
the day. The period of operation of the lamp depends on its geographic placement, weather conditions and
the light that is available at the respective time of the year.

CHOOSING THE IDEAL PLACEMENT:

Select an outdoor placement with full, direct sunlight where the solar panel can receive at least 6 hours of
sunlight per day. A shady placement affects the charging of the battery and reduces the operating time of
the lamp after sundown. Do not place the lamp close to a strong source of light such a street lighting as this
may cause the lamp to turn off automatically.

THE FIRST TIME YOU USE THE LAMP:

ASSEMBLY:
Turn the ON/OFF switch to the "ON" position. The light is controlled automatically by a light sensor. At
sundown, the solar lamp turns on using the energy stored in the battery. When you turn the switch to "OFF",
the solar lamp turns off to save energy. If the solar lamp does not light automatically at sundown, check the
following:
1. Make sure that the power switch is set to the "ON" position.
2. Check the battery to ensure that the battery terminals have a good contact.
3. Make sure that the solar lamp is placed in a sunny place and that the solar panel can receive direct
sunlight.
G541

Specification

1xNI-MH AA 600mAh 1.2V battery, 1x warm white led,
POLYCRYSTALLINE solar panel
LED not replaceable
Size: 25cm x25cm x55cm
Material: Metal
ALWAYS POSITION IN DIRECT SUNLIGHT FOR BEST
CHARGING
Instructions for Use
v001: 11/03/20