Using The Dispenser Control Panel - Electrolux ICON Use & Care Manual

Using The Dispenser Control Panel

Cube Button & Indicator Light
Crush Button & Indicator Light Press button to get crushed ice. Light displays blue. Press glass
Light Button & Indicator Light
Filter Status Button & Indica-
tor Light
Lock Button & Indicator Light
Express Freeze Button &
Indicator Light
Express Ice Button & Indica-
tor Light
Automatic Ice & Water Dispenser
Press button to get cubed ice. Light displays blue. Press glass against
ice dispensing paddle, holding high up to catch all ice.
against ice dispensing paddle, holding high up to catch all ice.
Press button to turn on dispenser light. Light displays blue. Press
button again to turn off dispenser light. Dispenser light also turns on
automatically when ice and/or water is dispensed.
Light displays in one of three possible colors each time the dispenser
is used to show status of water filter:
Green Water filter does not need changing.
Amber Water filter is about 80 percent used. Please order
new one.
Red Water filter is 100 percent used. Please change as
soon as possible.
After replacing the water filter, reset the filter status by pressing and
holding Filter Status button for 10-15 seconds.
The dispenser can be locked to prevent unwanted use. To lock, press
and hold button for 3-5 seconds. Light displays blue. To unlock, press
and hold button for 3-5 seconds until light goes out.
Press and hold button for 3-5 seconds to activate faster rate for freez-
ing food (preserving freshness). Light displays blue. Press and hold
button for 3-5 seconds again to deactivate.
Press and hold button for 3-5 seconds to increase ice production for
special occasions, such as parties. Light displays blue. Press and
hold button for 3-5 seconds again to deactivate.
Express Ice should produce 25 to 50 percent more ice every 24 hours.
19