Page 1
® Wellue powered by Viatom Wearable Pulse Oximeter (WearO2) Quick Start Guide Get ready to take charge of your health! Setting up your device is easy. Follow these quick steps to get you started with your monitor.
Page 2
Start monitoring Wear the device on thumb finger, index finger as option in case of too tight for thumb. Try to move the sensor along the forefinger to find out a best fit. Avoid being loose. Loose wearing causes inaccurate measure. Turn on the device.
Page 3
Stop monitoring & sync data Stop monitoring: Take off the device, the countdown will begin. (If the working time is less than 2 minute, there will be no countdown) During the countdown, if you wear the device again, the record will be resumed. After the countdown, the data will be ready for sync.
Page 4
Bluetooth Connection The device Bluetooth will be enabled automatically after it’s turned on. To establish a Bluetooth connection, 1) keep the device Bluetooth enabled. 2) Make sure the phone Bluetooth is enabled. 3) Run the App. Notice: DO NOT PAIR in the settings of your smart phone. Smart Vibration The vibrator in the sensor will be activated when the SpO2 fall below the preset value (Threshold).
Need help?
Do you have a question about the Wellue WearO2 and is the answer not in the manual?
Questions and answers