Water Tank - Meaco MeacoDry ABC 10L Instruction Manual

As a company we understand the urgency of Climate Change and recognise how important it is to play
our part in becoming more environmentally friendly. For this reason, there is not a continuous drainage
hose included in our dehumidifiers to reduce the amount of plastic waste created, as most of our
customers do not use them. If you would like to use the continuous drainage option on your dehumidifier,
you can either purchase a hose from our website (www.meaco.com) or use a garden hose that has an
internal diameter of 14mm (MeacoDry ABC 10L, 12L and 20L).

WATER TANK

---------------------------------------------------------------------------------------------------------------------------------------
The water tank is found on the front of the unit on the 20L model and at the back of the unit on the 10L
and 12L model. In order to empty the water tank, simply pull the tank out from the unit and empty the
water. The lid does not need to be removed as the water can be poured out of the hole at the corner.
The water collected can be used to water non-edible plants only – do not consume.
Please note, located inside the water tank is a float. It is essential this float is NOT removed from the
water tank. The float measures the level of water in the water tank and triggers the sensor to turn the
dehumidifier off when the water tank is full.
MEACODRY ABC 10L AND 12L DEHUMIDIFIER
Float
MEACODRY ABC 20L DEHUMIDIFIER
Float
13