Advertisement
1
2
4
info@emg.dk
5
4
6
3
www.emg.dk
• The next step is assembling the trolley handle.
• The order of all the needed parts must be
placed on the steel bolt as seen on the picture
to the left.
1 x
1 x
2 x
• The steel bolt must go through the holes in the
bracket and both ends of the handle.
• Make sure the shim rings are evenly
dristributed.
• A shim ring should be placed on each side of
the handle.
• Make sure the nuts and bolts are tight.
• With the handle assembled, place it on the
opposite site of the wheels and align it in center.
• Start drilling the holes.
• Insert the buttonhead bolts from the inside of
the bag and fasten the flange nuts as we did
earlier on the wheel bracket.
• Make sure the nuts and bolts are tight.
Head office:
John Tranums Vej 60, DK-6705 Esbjerg Ø
1 x
1 x
4 x
Phone:
4 x
+45 7023 1585
Advertisement
