Battery Installation - Fisher-Price DMR88 Manual

• For longer life, use alkaline batteries.
• Loosen the screw in the battery compartment
door and remove the door.
• Insert two, new C (LR14) alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
• If this product begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and reinstall them.
• If vibrations become faint or there are no
vibrations at all, remove the batteries from
the battery compartment and dispose of them
properly. Replace the batteries with two, new
C (LR14) alkaline batteries.
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.

Battery Installation

1,5V x 2
C (LR14)
Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
7