Table of Contents
Advertisement
Secure Your Child
Waist Belt
1
Restraint Pad
• Place your child in the seat. Position the
restraint pad between your child's legs.
• Fasten the waist belts to each side of the
restraint pad. Make sure you hear a "click"
on both sides.
• Check to be sure the restraint system is
securely attached by pulling it away from
your child. The restraint system should
remain attached.
• Tighten each waist belt so that the restraint
system is snug against your child. Please
refer to the next section for instructions to
tighten the waist belts.
A
B
2
TIGHTEN
To tighten:
• Feed the anchored end of the waist belt up
through the buckle to form a loop
free end of the waist belt
To loosen:
• Feed the free end of the waist belt up through
the buckle to form a loop
by pulling on the end of the loop toward the
buckle. Pull the anchored end of the waist belt
to shorten the free end of the waist belt
Waist Belt
B
A
LOOSEN
A
. Pull the
B
.
A
. Enlarge the loop
B
.
Soothing Vibrations
• Make sure your child is properly secured in
the seat.
• Press the soother power button
turn vibration ON. Press again to turn
soothing OFF.
Hint: The soothing unit turns off after
approximately 30 minutes. Press the power
button to restart.
Toddler Mode
Small Slot
• Insert the restraint belts back through the
small slots in the pad.
• Insert the restraint pad down through the
large slot in the pad.
11
Power Button
to
Large Slot
Advertisement
Table of Contents
