HMI Navigation Overview
Temperature U81923 Only
Icon
Description
These pushbuttons enable and disable the heat circuit for each heat load. The enabled or disabled
status for each heat load is displayed underneath.
This indicates if heater is heating or not.
Red "Heater On" indicates that the heater is active.
Yellow "Heater Off" indicates the heater is not active.
This is the set point of the heat zone. Units are degrees Celsius.
Displays the actual temperature of the heat zone. In the case of the tanks, it also displays the tem-
perature of the probe under the blanket.
Are used to enable or disable all heat zones at the same time.
Indicates the temperature of the mixed material at the outlet.
This navigates to the screen where the heater gains are set.
16
334116D