Main Menu - Graco PR70 Operation & Maintenance Manual

Main Menu

Icon Description
Enables the pump drive. When the system is powered up or the drive faults, it needs to be enabled.
Disables the pump drive. This is useful for maintenance. It also is need to clear some drive faults; dis-
able the drive and then enable it.
Indicates if the pump drive is disabled or enabled.
Indicates pump motor position. This is a useful reference to where the pump is. Units are revolutions.
This is used to send the pumps to the home position. Note the home position is the point in the dis-
pense cycle when the pistons begin metering material.
This starts a pump dispense cycle. Green indicates the pumps are in a dispense cycle. This signal
works the same as the start cycle hard wired input.
This is used to jog the pumps in the forward direction. This is used for maintenance.
This is used to jog the pumps in the reverse direction. This is used for maintenance.
Used to start data logging when the system is powered up. See Appendix C - Data Logging U81923
Only for more information. U81923 Only.
This closes the HMI program and returns the HMI to it's operating environment. This is only used for
changing HMI programs or updating the software.
This is used to silence the audible alarm.
334116D
HMI Navigation Overview
11