Sharp GX-31 User Manual page 136

e00_cover_7.book Page 135 Wednesday, March 10, 2004 6:22 PM
To Record a Voice Message
1.
Press to display the Main menu.
Press a, b, c or d to highlight "Organiser",
2.
then press to select.
Press a or b to highlight "Voice Recorder", then
3.
press to select.
4.
Press to start recording.
To stop recording before the recording time is over,
press .
Press a or b to highlight "Save" to save the voice
5.
message, then press to select.
If you have selected "Choice" when saving, the
memory card is not inserted, or memory has run out,
press a or b to highlight "Save to Handset" or
"Save to Card", then press
Tip
• You can also record a voice clip by pressing
during stand-by, then press R whilst the Main menu
is displayed, instead of steps 1 to 3.
• If you wish to record a voice clip again, press C
[Cancel] in step 5. The screen will return to step 4.
Selecting the Recording Time Mode
You can select the recording time mode.
1.
2.
3.
4.
To Play Back the Saved Voice Message
1.
2.
.
3.
Tip
• The volume varies depending on the Ringer Volume
settings (p. 146). To adjust the volume, press a or
b, or the side-up or side-down key. The volume is 0
when "Ringer Volume" is set to "Silent" and 1 when
set to "Step Tone".
Perform steps 1 to 3 in "To Record a Voice
Message" on page 135.
Press A [Options] to display the Options menu.
Press a or b to highlight the "Record Time", then
or A [Select] to select.
press
Press a or b to highlight "Extended Voice" or
"For Message Sending", then press
Perform steps 1 to 4 in "To Record a Voice
Message".
Press a or b to highlight "Playback", then press
to select.
Press .
The recorded voice message is played back.
To stop playback, press .
to select.
Organiser 135