1
Operating the
appliance
Install and connect washing
Note:
O p e r a t i n g t h e a p p l i a n c e
machine properly.
Before the 1st wash ~ Page 32
Preparing the washing
machine
Notes
Never switch on a damaged
■
washing machine!
Inform customer service!
■
Connect the mains plug.
1.
Turn on the tap.
2.
Open the door.
3.
Check that the drum is completely
4.
emptied. Empty if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The program default settings for the
selected program appear in the display
panel:
Temperature*,
■
Spin speed*,
■
The maximum load and the duration
■
of the program (alternately),
Energy consumption*.
■
*depending on the model
Operating the appliance
Change the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
~ "Programme default settings"
on page 13
Overview of programmes ~
Supplementary sheet for the operating
and installation instructions.
en
15